Instructions

Instructions for our Stickers:

 

1. the sticker is supplied on a portable film and is backed with paper.

2. peel off the paper.

3. stick with the foil on the desired cleaned surface.

4. press the sticker properly and squeeze out air bubbles if necessary.

5. slowly pull off the foil.

6. this is how the finished sticker should look like.

!! At temperatures below 10 degrees, the surface on which the sticker is to be stuck, must be warmed or stuck in the garage !!!

 

Instructions for ironing the foil

The textile material to which the motif is applied must not contain silicone. Nylon and impregnated fabrics are not suitable for film application. Washing is possible in a normal washing machine up to a maximum temperature of 40 ° C. Wash clothes with applications inside out. After washing, it is necessary to iron only from the reverse side to temperature level 2 (cotton). IMPORTANT: DON'T USE STEAM !!

 

1. Remove the protective white paper
1. Place the iron on the desired place with the protective foil facing upwards.
2. Set the iron to temperature level 2 (cotton).
3. Place the iron on the foil and press firmly for 5 seconds.
4. After a few seconds, while still hot, carefully remove the protective film.
5. Press the iron directly on the motif for another 5 seconds, repeat if necessary.